德国Thermik L09.060.05.0200/0200温控开关

Contact type: normally open
Nominal switching temperature (NST) in steps of 5 °C:
60 °C - 160 °C
Standard tolerance: ± 5K
Reset temperature range below NST (UL / CSA):
-35 K ± 15 K
Operating voltage … AC / DC - available, 
values on inquiry: up to 500 V ~
Rated voltage UAC: 250 V (VDE) 277 V (UL)
Rated current AC cos φ = 1.0 (ohmic load) / switching cycles:
6.3 A / 10,000
Rated current AC cos φ = 0.6 acc. to IEC 60730-2-9 / switching cycles:
4.0 A / 10,000
Contact bounce time: < 1 ms
Contact resistance (acc. to MIL-Std. R 5757): < 50 mΩ
Impregnation resistance with- or without resin 
(acc. to requirements)*: suitable
Vibration proof at 10 … 60 Hz: 100 m/s2
Pressure stability of housing *: 300 N
High voltage insulation (not C - versions): 2 kV
Suitable for protection class I or II: suitable
Standard wiring connection: lead wire 0.5 mm2 / AWG20
Diameter: 10.9 mm
Heigth: 9.0 mm
Screw / -length: M6 x 8.0 mm
Wrench size / max. turning moment: 13.0 mm / 8 Nm
Approvals available (according to design): IEC; ENEC; VDE; UL; CSA; CQC